高压试验安全模糊综合评价方法研究
Research on Fuzzy Comprehensive Evaluation Method for Safety of High Voltage Test
投稿时间:2018-06-14  修订日期:2018-06-14
DOI:
中文关键词: 高压试验;安全评价;层次分析法;模糊综合评价法  一致性检验
英文关键词: high voltage test  safety evaluation  analytic hierarchy process  fuzzy comprehensive evaluation method  consistency check
基金项目:国网新疆电力有限公司资助项目
作者单位E-mail
王建 新疆电力公司电力科学研究院 13579928179@163.com 
邓慰 国网电力科学研究院武汉南瑞有限责任公司  
李炼炼 国网电力科学研究院武汉南瑞有限责任公司 13517233295 
魏伟 国网新疆电力有限公司电力科学研究院  
秦澔澔 国网电力科学研究院武汉南瑞有限责任公司  
马勤勇 国网新疆电力有限公司电力科学研究院  
摘要点击次数: 348
全文下载次数: 
中文摘要:
      电气设备的高压试验大多属于破坏性试验,容易引起设备故障和人身伤亡。为了评估实验室高压试验的安全风险,运用层次分析法和模糊综合评价法,以试验环境风险因素、试验设备风险因素、人员素质风险因素、现场管理风险因素、应急与事故风险因素为目标层建立安全指标评价体系,并对新疆某高压实验室高压试验安全风险进行了相应的定量计算。计算结果表明:建立的三层评价体系,经过一致性校验,CR值均小于0.1,即证明所确定的目标层和准则层各影响因素权重是合理的;监护制度管理和应急准备评分值最低,说明该高压实验室高压试验安全体系中监管体制不够严格,同时安全风险的应急准备不充分;高压试验安全等级综合评价最终的综合评价值为0.7181,表明该高压试验室安全风险管控处于安全的状态。该评价方法可为电力行业高压实验室高压试验安全管理提供参考。
英文摘要:
      The high voltage test of electrical equipment is mostly destructive testing, which can easily lead to equipment failure and personal injury. In order to evaluate the safety risk of high-voltage test in laboratory, analytic hierarchy process and fuzzy comprehensive evaluation method were used. The safety index evaluation system was established based on the test environment risk factors, test equipment risk factors, personnel quality risk factors, site management risk factors, emergency and accident risk factors. The safety risk of high voltage test in a high voltage laboratory in Xinjiang was quantitatively calculated. The calculation results show that: the three-layer evaluation system was established, and the CR value were all less than 0.1 by the consistency check It is reasonable to prove the influence factors of the target layer and criterion layer; The monitoring system management and emergency preparedness score are the lowest, which indicates that the supervision system in the high voltage test safety system of the high voltage laboratory is not strict enough. Meanwhile, the emergency preparedness for security risks is inadequate; the overall evaluation value of the comprehensive evaluation in the high voltage test safety grade is 0.7181, which indicates that the safety risk control of the high voltage laboratory is in a safe state. The evaluation method can provide reference for the high voltage test safety management in the power industry.
View Fulltext   查看/发表评论  下载PDF阅读器
关闭